Radiotherapy Accessories
Prostate LDR Brachytherapy
Quality Assurance Tools

Isocentric Beam Checker I

The Isocentric Beam Checker, IBC I, is used to precisely find the isocenter of any radiation therapy machine. It checks the alignment of side lights or laser beams used for patient set-ups in radiation therapy, conventional tomography, and CT scanning. The IBC I consists of a stainless steel base containing three adjustable rubber-tipped legs and a built-in bubble level. Attached to the base is a translucent screen plate which can be rotated 360 degree in 15 degree steps. Inscribed on the plate are three field sizes; 2 mm x 2 mm, 5 cm x 5 cm and 10 cm x 10 cm. The field sizes are outlined with parallel and diagonal lines. The center of the field and all corners are provided with tungsten markers to project a sharp image of the field on verification films.
For more information, please contact sales@micknuclear.com

Isocentric Beam Checker II

The multifunctional Isocentric Beam Checker, IBC II, consists of a large opaque acrylic screen backed by a secondary plate, both supported by two lateral uprights. The screen is inscribed with lines precisely defining corners, edges, and center of the screen's 2mm x 2mm, 5cm x 5cm, 10cm x 10cm, 15cm x 15cm, and 20cm x 20cm fields. Intersecting center lines are inscribed with short lines spaced 1 cm apart. The screen can rotate about ist axis in increments of 45 degree. Tungsten markers of 2 mm diameter are embedded in the center and corners of the fields. A 10" x 12" ready-pack film can be sandwiched between the two plates. When exposed, the tungsten markers project as sharp image on the film. The necessity of pricking holes into the film is therefore eliminated.
For more information, please contact sales@micknuclear.com

Isocentric Beam Checker III

The Isocentric Beam Checker, IBC III, is designed to facilitate routine quality assurance tasks required daily, weekly or monthly on linear accelerators or Teletherapy units. Numerous mechanical parameters can be tested in a very short time due to the simplicity of the set-up.
For more information, please contact sales@micknuclear.com

Isocentric Beam Checker IV

The Isocentric Beam Checker, IBC IV, is a QA phantom, manufactured to ISO specifications, for performing Quality assurance checks as recommended by TG-142. The IBC IV can perform monthly checks of MV imaging system and treatment coordinate coincidence, MV scaling, kV Imaging system and treatment coordinate coincidence, kV scaling, and kV positioning / repositioning (shifts). The IBC IV is also a tool to verify that the MV imager’s central pixel is calibrated to the linear accelerator mechanical isocenter.
For more information, please contact sales@micknuclear.com

Perma-Doc Phantom

The PermaDoc Phantom provides the necessary permanent documentation required by the NRC quality assurance tests associated with HDR. The PermaDoc Phantom, with ist centimeter scale automatically transferred to the film by fluorescent radiation, readily identifies up to 20 source positions and their stepping accuracy. Two matching 3/8" plexi plates allow for insertion of a 10" x 12" ready-pack V-film. The film is exposed by the HDR source dwell times of one second over a maximum of 20 positions spaced 1 cm apart. The resulting film displays the source images superimposed on the image of the centimeter scale.
For more information, please contact sales@micknuclear.com

PermaDoc GC Phantom

The Gafchromic® PermaDoc GC Phantom is designed to check source positioning and stepping accuracy of HDR remote afterloading systems and provides a permanent record. It has a centimeter scale, which is projected onto the Gafchromic® RTQA film by fluorescent radiation, and readily locates, up to 20 source positions. The device consists of two plexi-glass plates stacked on top of each other with five locating pins and four knobs to ensure alignment. Four embedded ball plungers provide a space for easy insertion of the film. A 3 mm diameter groove is provided for the insertion of a straight tandem.
For more information, please contact sales@micknuclear.com

MultiDoc™ Phantom

The MultiDoc™ Phantom provides a method for accurate verification of the source position for every channel using video visualization of the live source. It is straightforward to setup allowing quick and accurate verification of the source position for every channel. Real-time visualization via HDMI as well as a recorded record of the source position is allowed. MultiDoc™ is easy to use and provides a permanent record of source position accuracy, source-step accuracy and source transfer tube length verification - all accomplished quickly and cost-effectively.
For more information, please contact sales@micknuclear.com

Reinstein EZ Cube Phantom

Reinstein EZ Cube Phantom is a radiation oncology QA phantom that provides rapid and reproducible ion chamber positioning from 1 cm to 12 cm depth at 0.5 cm intervals. Its unique design allows placement of the ion chamber through a range of depths, without ever having to readjust the phantom position with respect to the central axis or its TSD. This can save substantial amounts of time and reduce misalignment. The Reinstein EZ Cube Phantom is designed to simplify testing of beam output plus enregy constancy at three gantry angles: 90 degree, 180 degree and 270 degree.
For more information, please contact sales@micknuclear.com

+49 30 9487888-10
Robert-Rössle-Str. 10, 13125 Berlin Germany

Copyright © BEBIG Medical. All rights reserved.